1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Model A just spinning wheels

Discussion in 'Ingaming' started by Garvin Anbros, Oct 4, 2016.

  1. Garvin Anbros

    Garvin Anbros Member

    I'm posting this in "in game" as I'm not sure what to look at to solve this problem. The mods being used are these:
    1947 John Deere Model A
    (http://modcentral.co.uk/resources/1947-john-deere-model-a.11/reviews)
    Small Farming pack
    (http://modcentral.co.uk/resources/small-farming-pack.9/)
    Real terrain
    (http://modcentral.co.uk/resources/oeb-real-terrain.22/)

    When I use the tractor with the plow from the pack. The first pass will be fine. But when I make my second pass, as soon as the 1 rear tire falls into the cut, it spins as though it's not even touching ground. Thus turning a fairly simple job into a long painful one. I'd almost say the tractor bottomed out but there is so much ground clearance that I'm thinking it's the collision box for the tractor (if that makes any sence).

    The log shows clean mods but will post it later today when I have a chance.


    Edit, October, 4, 2016, I have attached the log.
    Edit: same day, I have attached the log.
     

    Attached Files:

    Last edited: Oct 5, 2016
  2. Garvin Anbros

    Garvin Anbros Member

    I've gone through the model of the plow and tractor to see if there is a problem i can find and fix but no such luck with that. Was hoping to have a idea by now as to a fix but I'm guessing from the silence that your as stumped as I was. Hopefully this will be addressed with 17 coming out soon.
     
    Last edited: Oct 10, 2016
  3. dj

    dj Testing Staff Testing Staff SOB Modding Wiki Contributor

    Hi Mate,

    We are sorry that there has not been a reply, we are all awaiting FS17, and not doing a lot of playing/modding for FS15

    The wheel collisions are a bit low for the plouging settings in the latest OEB Real Terrain mod.

    to correct this, open the model in GE, preferably V6.0.3

    in the scenegraph look for: wheelRightBack_col (index 0>15)
    then raise the value of the Translate Y in the attributes section, from 0.904 to 1.004

    also do this for: wheelLeftBack_col (index 0>16)

    I hope that you can manage to do this

    edit: make sure that you do not move the camera in GE, it messes the ingame camera up
     
  4. Garvin Anbros

    Garvin Anbros Member

    Ok. It's understandable. I too am looking forward to fs17. I really want to see if row crop cultivators are an option now for weed removal.
     
    Last edited: Oct 11, 2016

Share This Page